Vehicles
Sections
257 not categorized PORSCHE BOXSTER RABCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 (includes uncategorized and accessory items) 99610622652 The original plastic part is fragile and deteriorates rapidly and failure is catastrophic. This new design incorporates an all aluminum construction that is vastly more robust than the original plastic part. It has been designed to last the lifetime of the vehicle and will tolerate multiple hose replacements. Installation is the same as the original part and includes new stainless steel mounting hardware. View/Change Diagram
From $7.22
Make a selection BES99105060S - + 12 crank hp & + 12 crank torque - 2 3/4 tubing (70mm) straight through design for max. Power - weighs 18 lbs. (8.5 kg), which is a 3 lbs. Savings off of OEM center muffler. - replaces stock side mufflers and stock center muffler. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 2 x 3.5 (90mm) round tips. - includes all necessary clamps and mounting brackets. - made in Germany. - intoxicating cup car growl at idle, partial throttle and wide open throttle. - no dme programming necessary, does not alter emissions, 50 state legal in the u.s. Our 991 GT3 center muffler replacements are vastly different than the baffle plated mufflers stuffed with packing that are common in the after...(choose a part on the right to read more)
$2,337.50
Make a selection 96434101807AT By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. This item is also available with race bearings (85 shore).article number FVD 341 018 07at the reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform y...(choose a part on the right to read more)
$418.00
Make a selection 96433102200RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection 92834102833ATK By ordering this part number you get after previous sending in your wishbone overhauled with new silent blocs back. Should it not be repairable, we will inform you immediately.
$342.10
Make a selection 91157132032EQ Fan wheel mounted on the engine and already balanced, thus considerable time savings
$102.30
Make a selection 91111124503EQ Is your exhaust tip a little old and unappealing to look at? Update it with this durable chrome plated stainless tip. This is a direct replacement for original part numbers, 901 111 245 00 and 901 111 245 01 and fits models up to 1989 with 60 mm (2.3 inches) diameter muffler exit pipes. T304 stainless steel. Chrome plated. 70 mm (2 3/4 inch) outer diameter. Original design and look. Slip on, does not require welding. Quality tuning part manufactured by dansk. They offer a complete line of replacement parts and tuning parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This ...(choose a part on the right to read more)
$40.70
Make a selection 846R9066 Material: 11 gauge, type 304, stainless steel. General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 CAYMAN 2006-08 911 1989-94 911 1970-73
$127.20
Make a selection 846R9062 Material: 11 gauge, type 304, stainless steel. General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 CAYMAN 2006-08 911 1989-94 911 1970-73
$127.20
Make a selection 20202HDC4D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup. General Fitment911 1998-05
$1,586.45
Make a selection 20202HDC6D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General Fitment911 1998-05
$1,502.96
Make a selection 20934HDC6 The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General Fitment911 1998-05911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09
$2,505.33
Make a selection 21011196402 Say good bye to the days of having to weld and cut aftermarket sport cats to make them fit! We have our sport cats made in Germany to our specifications and that means that these are 100% bolt on without issue! - + 10 crank hp & +6 crank torque. - 200 cell, tri metallic German hjs sport catalysts. - large volume o 105 mm (4.1 inch diameter) high flow cat. - exhaust hanger brackets are included so that the heat shield does not have to be removed. - weighs 7.2 lbs. (3,2 kg). - direct bolt on replacement. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress. - made in Germany. - more distinguished flat 6 growl at wide open throttle. The FVD 200 cell...(choose a part on the right to read more)
$1,593.90
Make a selection 24091135201BH Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: * 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. * 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. * 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period. Yellow: the suc...(choose a part on the right to read more)
$212.30
Make a selection 6890031506 Ranked number one in the world, austrian manufacturer remus is ahead of the game with their top of the line exhaust systems. At remus, an exhaust is not simply built and put on the market. Each setup is rigorously tested not just for optimum performance, but for the highest quality sound attainable. If they are not perfect, the system is re-engineered and tested until the perfect balance between performance and sound is achieved. Every remus exhaust system is crafted from only the finest titanium and steel, giving it the durability necessary to stand up to the rigors of various driving styles. General Fitment911 1998-05911 TURBO/GT2 2001-05
$4,338.90
Make a selection 20101HDB4R The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is a very aggressive setup. General Fitment911 1998-05
$1,586.45
Make a selection 20101HDB6R The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General Fitment911 1998-05
$1,502.96
Make a selection 20101HDC6D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General Fitment911 1998-05
$1,502.96
Make a selection 150TB112801 High-performance, direct replacement torsion bar set that allow you to dial in the correct spring rate for street or track use. Features: lighter weight tubular / hollow torsion bar set manufactured from aircraft grade, 4340 alloy steel heat treated for increased strength and durability powder coated to resist corrosion consistent outside diameter and rate for consistent spring rate made in the usa by sway-a-way sold as a set. 1 necessary per axle.
$515.90
Make a selection 150SC031 Protect your valuable dashboard and interior the next time you take your car out! Our sun shades are tailor fitted for your Porsche! Features: laminate construction for durability. Silver reflective surface. Foam core for insulation. Folds easily for storage.
$109.99
Make a selection 150SC029 Protect your valuable dashboard and interior the next time you take your car out! Our sun shades are tailor fitted for your Porsche! Features: laminate construction for durability. Silver reflective surface. Foam core for insulation. Folds easily for storage.
$109.99
Make a selection 129PR111840 The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved. Sold individually.
$1,267.20
Make a selection 1903706327 First shown as the 901 prototype at the 1963 geneva show, the 911 quickly built on the Porsche legend established by the 356 models. A process of continuous evolution has kept the 911 fresh for nearly 40 years, while impeccable build quality has ensured that most of even the very earliest cars have survived as desirable and usable classics. 192 pages. General FitmentACCESSORY
$92.32
Make a selection 129PR801852 The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved.
$1,067.00
Make a selection 129PR801840 The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved. Sold individually.
$970.20
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |